Projects

Scrap Metal Bailing Machine

Scrap Metal Bailing Machine

Key features:

  • 1 x 75 kW Electric motor
  • Double vane pump (225 L/min + 225 L/min)
  • Off-line filtration / cooling system (105 L/min, 10 micron)
  • Bespoke manifold block with cylinder ‘regen’ feature
  • 2 x Cetop 10 directional control valves
  • 3 x Cetop 8 directional control valves
Aerospace Ring Main Power Unit

Aerospace Ring Main Power Unit

Key features:

  • 1 x 132 kW Electric motor
  • Piston pump (300 L/min at 207 bar)
  • Accumulator soft start feature
  • Pressure filter 5 micron
  • Off-line filtration / cooling system (150 L/min, 5 micron)
Aeroshell 41 Test Rig

Aeroshell 41 Test Rig

Key features:

  • Fluid : Aeroshell 41
  • Piston pump, 6.4 L/min at 483 bar
  • Gear pump, 9 L/min at 210 bar
  • Off-line filtration / cooling system (54 L/min, 10 micron)
  • Auxiliary hand pump for static pressure test (350 bar)
  • Polycarbonate guarding c/w safety interlocks
Flushing Rig

Flushing Rig

Key features:

  • 1 x Vane pump, 140 L/min at 40 bar
  • 1 x Piston pump, 2.5 L/min at 700 bar
  • Pressure & return filters 5 micron
  • Electronic level & temperature sensor
  • Electronic particle counter
Gearbox Lubrication Units

Gearbox Lubrication Units

Key features:

  • Fluid : Mobil Gear Oil 626
  • Gear pump, 6 L/min at 20 bar
  • Pressure filter 10 micron
  • 1 kW Immersion heater
1000 bar Skydrol Test Rig

1000 Bar Skydrol Test Rig

Key features:

  • Fluid : Skydrol LD-4
  • Piston pump, 5.2 L/min at 1000 bar
  • Off-line filtration / cooling system (25 L/min, 3 micron)
  • Auxiliary hand pump for static pressure test (1000 bar)
Off-Shore Gas Turbine Starter Pack

Off-Shore Gas Turbine Starter Pack

Key features:

  • 3 x 140 kW pump / motor sets
  • 250 L/min at 220 bar
  • Mechanical / electrical soft start feature
  • Pressure & return filters 10 micron
  • All components ATEX approved
Manifold Design & Build

Manifold Design & Build

Key features:

  • Bespoke manifold design
  • Anti-corrosion plating
  • Full in-house testing
Scrap Metal Shredder HPU

Scrap Metal Shredder HPU

Key features:

  • 5.5 kw Electric motor
  • Gear pump, 22 L/min at 140 bar
  • 4 station Cetop 3 manifold block
  • 10 micron filtration
ATEX Approved Off-Line Flushing Rig

ATEX Approved Off-Line Flushing Rig

Key features:

  • 0.75 kW Electric motor
  • Bell Housing & Drive coupling ATEX Approved
  • Cast Iron gear, pump 23 L/min at 15 bar
  • Duplex pressure filter 10 micron
Proof Pressure Test HPU

Proof Pressure Test HPU

Key features:

  • 4 kW Electric motor
  • Piston pump, 5 L/min at 400 bar
  • Pressure filter 5 micron
  • Directional control valve 400 bar rated
  • Integrated electrical controls
Aerospace Control Panel

Aerospace Control Panel

Key features:

  • Fluid : OM-11
  • Aluminium Construction
  • Deigned for ring-main application
  • Proportional pressure control
  • Kracht flow meter
Deck Crane HPU

Deck Crane HPU

Key features:

  • 2 x 45 kW pump / motor sets
  • 2 x 100 L/min at 250 bar
  • Pressure filter 10 micron
  • Stainless steel tank & pipe work
  • Marine application
Skydrol Test Bench

Skydrol Test Bench

Key features:

  • Fluid : Skydrol LD – 4
  • All Stainless steel fabrication
  • Auxiliary hand pump for static pressure test (350 bar)
  • Ashcroft calibrated gauges
  • Valves & pipe work rated for 350 bar working pressure
Filter Press HPU

Filter Press HPU

Key features:

  • Fluid : ISO 32 mineral oil
  • 1 x 4 kW Electric motor
  • 2 stage pump
  • Maximum working pressure 700 bar
  • Leak proof poppet design DCV
M/C Tool HPU

M/C Tool HPU

Key features:

  • 1 x 1.5 kW Electric motor
  • 1 x gear pump (9 L/min @ 80 bar)
  • 7 station Cetop 3 manifold
  • Accumulator clamp systems
  • Multiple pressure settings
Hyd Press HPU

Hyd Press HPU

Key features:

  • 1 x 7.5 kW Electric motor
  • Dual pump Hi / Lo system
  • 35 L/min @ 35 bar + 5 L/min @ 200 bar
  • Built in oil cooler (Bowman type)
  • Ring main application
Servo Valve Test Bench

Servo Valve Test Bench

Key features:

  • Fluid : Aeroshell 41
  • Dual pressure control (0 – 700 bar)
  • Fluid sample point
  • Ashcroft 160mm calibrated gauges
  • 3 micron filtration
Thrust Calibration HPU

Thrust Calibration HPU

Key features:

  • Parker servo valve control
  • 3 micron filtration
  • Bespoke manifold design
  • Air-blast cooler
  • Integrated electronic control panel
Twin Cylinder Doors HPU

Twin Cylinder Doors HPU

Key features:

  • 1 x 15 kW Electric motor
  • Double vane pump (63 L/min + 63 L/min)
  • 2 x Cetop 5 proportional directional control manifolds
  • Solenoid operated relief / unloader valves
  • Dual float switches
Bullet Pull HPU

Bullet Pull HPU

Key features:

  • 1 x 5.5 kw Electric motor
  • Pressure compensated Moog piston pump
  • 2 stage speed control
  • Solenoid operated relief / unloader valve
  • Soft-shift directional control valve
Top
©2024 by  Bell Hydraulics Ltd | Chapel Lane, Cwmbran, Gwent. South Wales. NP44 2PP